產品列表
 
首頁 > FWTWi-Fi AP 1xN
FWT Wi-Fi AP 1xN:
Wi-Fi AP with Fixed Wireless Terminal,WAN and External USB x3

Figure 1:Model FWTWi-Fi AP 1xN
FWT Wi-Fi AP 1xN is a WiFi access point with internal HSPA, HSPA+ or EVDO cellular modem and Fixed Wireless Terminal for Phone Call. Users can connect an analog phone to make a phone call using the voice band of the cellular modem while simultaneously access the Internet using the data band of internal modem. The model has an Ethernet WAN port and three external USB ports for failover and load balance.

It also offers calling features such as call waiting, call forwarding, call barring, conference call, and caller ID, etc. FWT supports TR-069 management and optional FAX through Fax Relay Server.

** FWT Wi-Fi AP with EVDO A is available with 800 MHz and 1900MHz and optional at 450 MHz by project base.

General Feature:
  • Internet access over WAN (support DHCP, Static IP, PPPoE) and/or internal HSPA, HSPA+ or EVDO
  • Three external USB for extra USB 3G dongles
  • Failover from WAN to 3G or Load Balance among WAN and 3Gs.
  • Wi-Fi access point (Internal antennal, optional external)
  • FWT (Fixed Wireless Terminal)
  • Short message SMS
  • Built-in TR-069 for Management
Calling Features
  • Call Waiting
  • Call Barring
  • Call Forwarding
  • Call Conferencing
  • Caller ID
WiFi Specification
Output Power (WiFi)
  • 802.11n:11 dbm
  • 802.11g:13 dbm
  • 802.11b:15 dbm
Sensitivity (WiFi):
  • 802.11n : -68 dBm
  • 802.11g : -68 dBm
  • 802.11b : -85 dBm
WiFi Frequencies
  • 2,4 - 2,462 GHz, CCK / OFDM (Modulation Range Coverage)
WiFi Distances
  • Indoor: approximately 30 to 50 meters
  • Outdoor: 80 to 100 meters
Compatibility
  • IEEE 802.3 10 Base-T Ethernet
  • IEEE 802.3u 100 Base-TX Fast Ethernet
  • IEEE 802.3x Flow Control
  • IEEE 802.11 b/g/n Wireless
Mechanical
  • Plastic Housing with External Connectors
  • Dimension (L x W x H): 110 x 155 x 32 mm
  • Weigh: 260g
  • Temperature Normal Operation: -10oC ~ +55oC
  • Temperature Storage: -40oC ~ +85oC
  • Storage Humidity : +85oC, 85% of relative humidity (with no condensation)
Connection Interfaces
  • WAN Ethernet Interface 10/100 Base-TX, connector RJ-45
  • LAN Ethernet Interface 10/100 Base-TX, connector RJ-45
  • RJ11 FXS Interface for Handset fixed phone (FWT)
  • Three type B USB Connector
  • SMA Connector for external 5 bands 3G antenna (50 Ohm - option for internal 5 bands 3G antenna)
  • SMA Connector for Wi-Fi
  • Internal SIM Card Reader: Chip SIM CR 3.0V, 1.8V
SMS
  • Point to Point MO and MT
  • SMS Cell Broadcast
  • Support PDU and Text mode
Voice
  • Vocoders: 13K, QCELP, EVRC
  • Support DTMF
Firewall
  • IP and MAC Filter
  • Virtual Server and DMZ
  • NAT (Network Address Translation)
VPN
  • GRE
  • PPTP
  • L2TP
  • IPSec
Communication Protocols
  • IP, NAT, DHCP, PAP, CHAP, PPP, TCP, UDP, HHTP, NTP, TR-069 (other protocols upon request)
AC-DC Power Adapter
  • Input: 90 to 240 VAC / 0.3A
  • Frequency: 50/60 Hz
  • Output: 12 VDC / 1 A
DC Input
  • Input Voltage Range: 6 to 12 VDC
  • Input Power: 12 W
  • Input Connector: J4 (internal positive)

Specifications of Internal Cellular Modem (The product is available with the following Cellular Modules. Others are on a customized project base)


For HSPA
  • Output Power (GSM / 3G)
    • Class 3 for UMTS/HSDPA/HSUPA
    • Class 4 for GSM 900
    • Class 1 for GSM 1800
    • Class E2 for EDGE 900/1800
  • Frequency Bands (GSM / 3G)
    • Tri Band UMTS/HSPA 850/1900/2100MHz
    • Quad Band GSM (GPSR/EDGE) 850/900/1800/1900MHz
  • Data (cellular interface):
    • HSUPA uplink up to 5.76Mbps
    • HSDPA downlink up to 7,2Mbps
    • WCDMA (UMTS) up to 384Kbps
    • EDGE class 12 - up to 118Kbps (UL), 236,8Kbps (DL)
    • GPRS class 12 - up to 42,8Kbps (UL), 85,6Kbps (DL)

For HSPA+
  • Output Power
    • Class 4 (2 W) for GSM900
    • Class 3 (0.25 W) for UMTS/HSUPA
    • Class E2 (0.5 W) for EDGE900
    • Class E2 (0.4 W) for EDGE1800
    • Class 1 (1 W) for GSM1800
  • Frequency Bands
    • HSPA+/UMTS 900/2100MHz
    • Quad Band GSM (GPSR/EDGE) 850/900/1800/1900MHz
  • Data transmission
    • HSPA+: Max. 21 Mbps (DL) / Max. 5.76 Mbps (UL)
    • HSDPA Category 6/8/14 supported
    • HSUPA Category 3/4/6 supported
    • Compressed mode according to 3GPPTS25.212
    • UMTS: Max. 384 kbps (DL) / Max 384 kbps (UL)
    • EDGE class 12: Max. 237 kbps (DL) / Max 118 kbps (UL)
    • GPRS class 12: Max. 85.6 kbps (DL) / Max 42.8 kbps (UL)

For EVDO A 800 MHz
  • Frequency range: 824MHz ~ 849MHz
  • Maximum Frequency error : ±300KHz
  • Maximum output power : 23 ~ 30dBm
  • Minimum controlled output power : < -50dBm
  • Standby output power : < -61dBm
  • Code domain power :
    The code domain power in each inactive code channel shall be 23 dB or more
    below the total output power measured on both I and Q data channel combined.
  • Time reference ±1.0uS
  • Waveform quality > 0.944
  • Range of open loop output power : (test1: -25dBm/1.23MHz) - 50.7±9.5dBm (test2: -60dBm/1.23MHz) - 10.7±9.5dBm (test3: -91.3dBm/1.23MHz) - 20.3±9.5dBm
  • Standard Compliances : CDMA2000 EVDO Rev. A (compatible with EVDO Rev .0 & 1x)
  • Data Features: 1X Data = 153.6Kbps max EVDO = Upload 1.8Mbps / Download 3.1 Mbps max

For EVDO A 1900 MHz
  • Frequency range: 1850MHz ~ 1910MHz
  • Maximum Frequency error : ±150KHz
  • Maximum output power : 23 ~ 30dBm
  • Minimum controlled output power : < -50dBm
  • Standby output power : < -61dBm
  • Code domain power :
    The code domain power in each inactive code channel shall be 23 dB or more
    below the total output power measured on both I and Q data channel combined.
  • Time reference ±1.0uS
  • Waveform quality > 0.944
  • Range of open loop output power:
    (test1: -25dBm/1.23MHz) - 50.7±9.5dBm
    (test2: -60dBm/1.23MHz) - 10.7±9.5dBm
    (test3: -91.3dBm/1.23MHz) - 20.3±9.5dBm
  • Standard Compliances : CDMA2000 EVDO Rev. A (compatible with EVDO Rev .0 & 1x)
  • Data Features: 1X Data = 153.6Kbps max EVDO = Upload 1.8Mbps / Download 3.1 Mbps max


*Specifications are subject to change without notice

 首頁 | 關於我們 | 下載中心 | 發送郵件 | 在綫演示
© copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
JameyMy status    LarryMy status    AdrianMy status