3Jtech homepage

eCAMit III Specifications:
Power consumption: 5V DC, 300mA
Interfaces:
DB9C for configuration setup and optional accessories
RJ45 for Ethernet 10BaseT
RJ22 for 5V DC /90~240V AC adaptor and trigger input /output
Trigger input: Normal Close to Open or Low to High TTL level
Motion detection sensitivity: High, Medium, and Low
Trigger out: Low to High TTL Level
Internet Protocol for IP connection: UDP
UDP Port Used: 80 and any port above 1000
Transmission Speed (frame/sec.):
High Resolution (640x480): ~ 6
Medium Resolution (320x240): ~ 15
Low Resolution (160x120): ~ 15
CMOS Camera support Specification:
300K pixels, 1/3”
S/N Ratio: > 48dB
Gamma Correction: 0.45
Lens: (others are available as optional items)
Min. Illumination: <2.5 lux @ f2.0
Focal Length: 2.5mm
Back Focal Length: 5.96mm
Aperture: F 2
Angle of View (DIA): 90
Operation Environment:
Temperature: 0oC~55oC
Humidity: 85% relative at 25oC
Weight: 150g
Dimension of Main Body: 4.8cm x 6.7cm x 10.2cm

The NAS, or also called our camDisk, if used together with our eCAMit III IP Network camera, can achieve the functions of a DVR (Digital Video Recorder). However, one advantage over regular DVR's is that you can separate the camera (eCAMit III) and the storage device (camDisk). This ensures the secuity of the recorded images where you have the camera at the monitoring site and the storage device in a remote location which is all connected to the Internet. Each camDisk can record up to 4 eCAMit III's simultaneously.

Live Demonstration: Please download the application program and install the software onto a computer that has Internet access. Live sites are included in the bookmarks of the program for users to play around with. For more information about how to use the application program, please download the User's Manual.